Arduino/Radiometrix RTTY 70cm tracking  

James Zelazny jr
(@n2nxz)
Member Registered

Just thought to share another method for a balloon tracking system.In some countries,it is not legal to use particular radio frequencies for this purpose.Here may be a loop hole for some that would like an alternative.The Arduino sketch attached is for a fully working 70cm RTTY tracker.

Look over these weblinks to understand this better.This was one of my very first builds some years ago and flew successfully.

https://ukhas.org.uk/guides:linkingarduinotontx2

Software for tracking -

https://ukhas.org.uk/guides:tracking_guide

http://www.essexham.co.uk/high-altitude-balloon-tracking

Arduino/Radiometrix 70cm sketch attached.

Get your flight on the tracking map - http://habitat.habhub.org/genpayload/

Tracking map used = https://tracker.habhub.org/#!mt=roadmap&mz=5&qm=1_day&mc=53.46751,-9.26514

 

 

 

 

Edited: 6 days  ago
ReplyQuote
Posted : 21/06/2017 2:08 pm Roberto Pietrafesa liked
  
Working

Please Login or Register